Monday, 28 April 2014

Horizon Glass Handling Truck with Auto-Drive


The ‘Horizon’ glass handling truck with auto-drive is a glass lifter designed for in-shop use to assist glass workers and glaziers to unload, rotate, transport and lay large sheets of glass flat onto a cutting table or tempering line.

This glass lifter has a lifting capacity of 300kg / 660lb.

The ‘Horizon’ auto-drive glass lifter has a 12 volt battery powered vacuum pump and 2 hydraulic rams.

This glass handling truck will lift and tilt glass to the horizontal. It will allow one operator to lift glass or an IGU (insulated glass unit) form rack or truck, then index the glass to the horizontal and slowly and precisely lower the glass onto a table or frame.

The ‘Horizon’ glass lifter allows one or two operators to handle the glass, rather than four to six as previously required, and with greater safety.

This glass lifter is ideal for setting DGUs (double glazed units) into a window frame to create a perfect seal.

The glass handling truck uses a battery powered rear drive wheel. The lifter is also equipped with powered side shift, which allows for up to 200mm movement to the left and right by use of an actuator.

Specifications:

Lifts glass from vertical to horizontal

Lifts up to 300kg / 660lb vertically

Lifts up to 200kg / 440lb horizontally

‘Onloads’ trucks and edgework machines

Lifts DGUs and glazed windows

Rotates glass 360 degrees

One man operation

Lifts glass 2440mm x 3660mm / 96” x 150”

Hydraulic rams and lifters

DC powered vacuum pack

Battery operated rams

Small footprint

Easy operation

For more information on the ‘Horizon’ glass lifting truck or the full range of Quattrolifts mobile glass handling trolleys and trucks please visit http://www.packline.co.uk/quattrolifts_glass_lifting.html.

 

Monday, 7 April 2014

Pallet Lift and High Lift Trucks


Packline are distributors for Logitrans Denmark materials handling equipment.

The Logitrans range includes stacker trucks, high lift pallet trucks, pallet trucks, also available in stainless steel models. The range of stacker trucks is available with bespoke attachments suitable for reel and drum handling.

The Logitrans range is available in a wide range of frame and leg configurations along with mechanical to powered lift, and models incorporating powered propulsion. The machinery's flexible design, coupled with a full range of lifting attachments, provide a comprehensive solution for handling loads up to 1200kg.

Packline Materials Handling offer a wide range of heavy duty lifting and handling equipment, designed to reduce injury to operating personnel, downtime and damage during transportation of stock from storage to processing machinery. 

As well as designing and manufacturing stainless steel reel and drum lifting equipment, to complement our range of materials handling solutions, Packline are also distributors for Logitrans Denmark Heavy Duty Lifting and Handling Equipment. Packline manufacture Heavy Duty lifting attachments for the Logitrans range of lifters.

The Logitrans range of Lifting and Handling Equipment includes Stacker Trucks, High Lift Pallet Trucks, Pallet Lift Trucks, also available in stainless steel and ATEX rated models. The range of Stacker Trucks is available with Bespoke Lifting and Handling attachments suitable for Reel, Roll, Drum and Barrel Lifting and Handling.

The Logitrans range is available in a wide range of frame and leg configurations along with mechanical to powered lift, and models incorporating powered propulsion.

The machinery's flexible design, coupled with a full range of lifting attachments, provide a comprehensive solution for handling loads up to 1200kg.

Demonstration models are available for use on-site or in Packline’s showroom.

For more information or a quotation, call us on 01202 307700 or email info@packline.co.uk.