Thursday, 25 September 2014

Pallet De-stacking and Dispensing from Ferroplan and Packline


Packline Materials Handling are the sole UK distributors of the ‘Ferroplan’ pallet dispensing or de-stacking systems.
The pallet stacker / dispenser automatically stacks or de-stacks one pallet at a time. Also, it is possible to load or unload a whole stack of pallets at once.
These pneumatic or electric pallet dispensers are suitable for all pallet types.

Options:

Pallet Master LP; pneumatically operated
Stack, destack and store pallets in fully automated Pallet Master.
Handle pallets at floor level.
Made in Finland.
1 operating mode: automatic.
Stack or destack single pallets at a time.
Capacity LP 14 => 15 pallets / 500 kg; or LP 25 => 25 pallets / 1000 kg.
Colour RAL 3020


 
Pallet Master LP 14 EL; fully electric
Stack, destack and store pallets in fully automated Pallet Master.
Handle pallets at floor level.
Made in Finland.
3 operating modes:


  • Dispensing; always a pallet dispensed onto the floor level ready for pick up.
  • Filling; always a slot at the floor level ready for entering the pallet automatic.
  • Stack or destack single pallets at a time.
Capacity LP 14 EL=> 15 pallets / 500 kg.
Colour RAL 3020


 
Pallet Master LP 1.7; fully electric
Stack, destack and store pallets in semi-automated Pallet Master.
Handle pallets at floor level.
 Made in Finland.
2 operating modes:


  • Dispensing; required quantity of pallets will be dispensed onto the floor level for pick up.
  • Filling; always a slot for max. 7 pallets at the floor level ready for entering the pallets.
Start of cycle from OP by operator.
Capacity 17 pallets / 700 kg.
Overfilling sensor and safety fences included.
Colour RAL 3020.


Benefits of the pallet dispensers include:

·         Handle pallets at floor level

·         Improve employees' safety

·         Simple and safe pallet handling

·         Reduce pallet damages

·         Tidier storage area

For more information on the Pallet stacking and dispensing systems from ‘Ferroplan’, or Packline’s full range of materials handling equipment, please contact Packline (+44 (0)1202 307700, www.packline.co.uk/pallet_dispenser).
 
 

Wednesday, 24 September 2014

Roll and Drum Handling with Forward Tipping Clamp Attachment


New to Packline Materials Handling, the overhead horizontal rotation forward tipping clamp attachment can be used to lift drums or rolls up to a maximum safe working load of 50kg.

The clamp attachment allows the drum or roll to be lifted and rotated by 360 degrees horizontally and as well as vertically, via the forward tipping mechanism.

On the clamp attachment back plate there is an indexing plunger that, when disengaged, will allow the operator to rotate this back plate. This will re-orientate the drum or roll into the horizontal if required.

At each side of the forward tipping clamp attachment the pads are locked into place using lever indexing plungers. By releasing the plungers the drum can be easily manually rotated from the horizontal to the vertical or vice versa as required.

Specifications:

Safe working load (SWL): 50kg
Minimum Diameter Load: 230mm
Maximum Diameter Load: 600mm

Packline Materials Handling are able to provide bespoke lifting and handling solutions for materials handling issues involving rolls, reels and drums; by creating new concepts or tailoring existing lifting and handling equipment to meet specific requirements.


For further information on on drum handling with the forward tipping clamp attachment or the full range of lifting and handling equipment, please contact Packline Materials Handling on +44 (0)1202 307700 or visit http://www.packline.co.uk; or contact our USA distributor Ultrasource LLC Roll Lifting.
 

Wednesday, 17 September 2014

Heavy Duty Rotating Tray Lifting Attachment for Lifting Rolls


New to Packline Materials Handling, the heavy duty rotating tray lifting attachment is suitable for lifting rolls of film or foil up to a required height, rotating the roll and then loading onto processing machinery as specified.

This heavy duty rotating tray lifting solution is designed to lift heavy rolls and rotate them into place as required. The lifter is designed to cope with the additional weight of the loads being handled.

The stainless steel, aluminium and delrin construction of the rotating tray lifting attachment ensures structural stability and the ability to lift the heavier rolls or reels. This construction is suitable for food and pharmaceutical production environments.

Specifications:

Safe working load:  up to 265kg

Attachment mass:  32.5kg

Maximum roll diameter:  600mm

Maximum roll length: 700mm

Smaller versions are available if required.

Packline Materials Handling are able to provide bespoke lifting and handling solutions for materials handling issues involving rolls, reels and drums; by creating new concepts or tailoring existing lifting and handling equipment to meet specific requirements.

For more information on the heavy duty rotating tray attachment for lifting rolls, or the full range of materials handling equipment, please contact Packline Materials Handling (+44 (0)1202 307700; www.packline.co.uk) or our USA distributor Ultrasource LLC Roll Lifting Equipment.