Thursday 11 May 2017

Stainless Steel Adjustable Cradle Attachment For Handling Rolls Of Paper, Foil And Film


The adjustable, clamping cradle attachment has been designed and produced to fulfil a customer’s requirement of lifting, transporting and loading different sizes of rolls of paper and film to a range of different packaging machines.

Constructed from stainless steel, the lifter is suitable for clean room environments, such as those found in the food and pharmaceutical industries.

The unique design supports the rolls by using a lifting shaft which is positioned through the central core of the roll.  The shaft is retained at each end by a pair of securing latches.  This ensures a safe and efficient solution which provides simple and controlled operation.

The lifting shaft is of a set length which enables the handling of many roll widths. The clamp attachment can be quickly and easily adjusted by a handwheel to suit the specific roll which is being handled at any one time.

The lifter raises and lowers the attachment by a battery powered mechanism and is operated by simple up and down buttons which are located ergonomically on the machines handle bars.

The design offers strength and durability with ease of operating and is suitable for the food industry and other hygienic applications as the solution is manufactured in stainless steel.

Technical Specification:

Attachment Lift Capacity: 150kg / 330.69lbs.                                      
Centre of Gravity: 747mm  / 29.41 inches (from column).          
Attachment Mass: 58kg / 127.87lbs.                                         
Main Materials: Stainless Steel & Anodised Aluminium.
Lifting Shaft Diameter: 25mm / 0.98 inches.                              
Minimum Lifting Shaft Length: 590mm / 23.23 inches.                          
Maximum Lifting Shaft Length: 1122mm / 44.17 inches.

For more information on the stainless steel clamping cradle attachment for handling rolls please contact Packline Materials Handling.

Friday 5 May 2017

Die Lifting and Turning Equipment used in Pie Making


The Die Block Rotating Equipment was designed in response to an enquiry made by a customer who had been trying to solve a long standing and potentially dangerous lifting issue.

 

In response, Packline designed and produced a safe and efficient solution which provides simple, cost effective and controlled operation.

 

The operator currently pulls a 60kg die block out of a pie machine by hand to a trolley that holds several dies in racks. There is a bending issue for lower levels, and a risk lifting to higher levels of the trolley.

 

The die block handling attachment can lift multiple size lid moulding die blocks to and from the storage trolley to the pie making machine.

 

The die blocks can rotate through 360 degrees, load and unload at a wide range of heights and they are secured in supporting arms by a pair of latch pins.  These features provide swift and easy docking with safe and reliable transportation and loading/unloading.

 

The lifting attachment’s gearbox rotation allows the operator to turn the die upside down for cleaning. This procedure could otherwise be a difficult handling issue.

 

The lifter raises and lowers the attachment by a battery powered mechanism and this is operated by simple up and down buttons which are located ergonomically on the machines handle bars.  The rotation is provided by a manual handwheel rotation through a gearbox drive.

 

The lifting equipment offers impressive strength and durability with ease of operating and is suitable for the food industry as the solution is manufactured in stainless steel.

 

 

Technical Specification:

 

Attachment Lift Capacity: 60kg / 132.28lbs
Centre of Gravity: 562mm / 22.13 inches (from column).                                    
Attachment Mass: 29.5kg / 65.04lbs 
Main Materials: Stainless Steel and Anodised Aluminium.

 

For more information on the die block handling equipment, or the full range of materials handling equipment, please contact Packline Materials Handling.

 
Die Lifting and Rotating Equipment for Pie Making.

Wednesday 5 April 2017

Quattrolifts ‘Mule’ Glass Lifting Equipment from Packline


The Quattrolifts ‘Mule’Glass Lifter is designed to assist glass workers to unload, rotate and transport large sheets of glass in-house.

The Mule glass lifter has a lifting capacity of 300kg / 660lb.

The Quattrolifts ‘Mule’ can rotate glass measuring up to 4400mm / 180”.

This glass lifter has a 12 volt battery powered vacuum pump.

The Quattrolifts ‘Mule’ can rotate glass sheets through 360 degrees meaning long and heavy sheets of glass can be loaded onto an edge work machine.

This glass lifter is suitable for setting double glazed units (DGU’s) into a window frame to create the perfect seal.

This glass handling equipment will allow one or two operators to achieve what may have normally required four or six previously. Safety is also improved.

Technical Specifications:
Safe Working Load (SWL): 300kg / 660lb.
Rotates Glass 360 degrees.
300mm / 11.8” diameter suction pads.
Handles long and narrow glass.
Handles large stock sheets.
DC power vacuum pack.
Small 600mm / 24” footprint.
Highly Manoeuvrable.
One man operation.

For more information on the Quattrolifts ‘Mule’ Glass Lifter, or the full range of glass lifting equipment, please contact Packline Materials Handling.

Thursday 30 March 2017

Quattrolifts Vector 800 Mobile Glass Handling from Packline Materials Handling


The Vector 800 Glass Handling Equipment is designed to enable operators to unload, transport and install large glass panels weighing up to 800kg.

This mobile glass handling and transporting equipment has a dual-circuit vacuum system designed for high performance.

Safe manoeuvring of large windows and glass sheets is provided by a vacuum sensor.

Using the self-propelled mechanism and a system of hydraulic cylinders, this glass handling robot can easily move and rotate heavy loads.

The Vector 800 can manoeuvre large panes of glass at different angles and ensure the safety of staff in the workshop, warehouse, factory floor and in the field.

Specifications:

Capacity: 800kg (1760lbs)

Hydraulic System: 24v / 1300watts

Battery: 2x 150 AMP HR

Charger: 110 - 220v x 20 AHr

Vacuum Pumps: 2 x 24V, 35 lit/min

Vacuum Cups: 8 x 300 mm sprung

Vacuum cup range - 1170mm (45") - 1890mm (75")

No-Load Lifting: 18mm/s (3/4 in/s)

No-Load Climbing: 8% Gradient

Machine Weight: 880kg (1936 lbs)

SIDE SHIFT - 110 mm (4.3")

 

For more information on the Quattrolifts Vector 800 Glass Handler, or the full range of glass lifting equipment, please contact Packline Materials Handling.

Tuesday 28 March 2017

Stainless Steel Drum Turner with Powered Rotation


This stainless steel drum turner with powered rotation has been designed to meet with a pharmaceutical customer’s requirement of lifting, transporting, loading and tilting drums to provide controlled emptying.

This bespoke lifter supports the drum by using an over centre latch clamp to secure and hold the drum centrally between the ribs.

The drum turner has powered rotation which is controlled from a pendant controller, ensuring a safe and efficient solution which provides a secure, simple and controlled operation.

The drum rotator is designed to be lifted by an overhead crane and has an adjustable top bracket to ensure that the centre of gravity is achieved correctly and the unit is supported in a true and square manner.

This lifter is suitable for the pharmaceutical and petrol-chemical industries and other, similar applications as the solution is manufactured in easily cleaned stainless steel, 304.

The attachment is backed up by a full bespoke design service ensuring the right solution can be made to suit many drum sizes.

Technical Specification:

Safe Working Load (SWL):  250k (551.16lbs).                                                       
Drum diameter and height:  560mm x 870mm (22.05 x 34.25 inches).             
Powered rotation:  360 degrees.
Battery powered:  12 volt. maintenance free battery.            
Main Materials: Stainless Steel & Anodised Aluminium.

For more information on the Overhead Drum Turner with powered rotation please contact Packline Materials Handling.

Thursday 23 March 2017

Quattrolifts Vector Glass Handling Equipment


The Quattrolifts Vector Glass Handling Equipment is designed to allow glaziers to unload, transport and install large plates of glass with extreme precision.

This glass lifting and transporting equipment has a lifting capacity of 400kg (880lbs) with a dual vacuum system designed for performance.

Handling large glass plates and windows can be a health and safety risk due to the weight and dimension of the plates. With the Vector’s self-propelled mechanism, moving and rotating heavy loads is now extremely easy.

The Vector Glass Lifter can move large panels of glass on a variety of angles, and will ensure the safety of the operator in shop and on site.

 

Features of the vector:

  • Lifting capacity up to 400kg (880lbs) 
  • Maximum lifting height of 3566mm (140”)
  • Dual vacuum systems 
  • Self-propelled 
  • Precision adjustment for glazing
  • Glazes overhead
  • Rotates and indexes IGU’s
  • 24V electrical system
  • Adjustable vacuum cups

For more information on the Quattrolifts Vector Glass Handling Equipment, or the full range of glass lifters, please contact Packline Materials Handling.

Tuesday 28 February 2017

Lifting Attachment for Handling Barrels and Kegs


The barrel and keg handling attachment, from Packline, has been designed to provide the safe and easy lifting and controlled movement of barrels or kegs.

This handling solution is designed to lift kegs of beer in the horizontal from the floor or a pallet up to and onto a storage frame.

This stainless-steel handling equipment, with electric lift, replaces an un-hygienic manual mechanism.

The barrel or keg is securely retained by a lug and cantilever arrangement which locates into the rim and supports the end of the barrel.  This feature provides a swift and easy docking that, in turn, provides safe, reliable transportation. This design allows kegs with a central tap hole to be lifted.

The lifter raises and lowers the barrel by powered drive and this is operated by simple up and down buttons which are located ergonomically on the machines handle bars.

This lifting equipment offers strength and durability with ease of operating and is suitable for the beverages and food industries, and other hygienic applications, as the solution is manufactured in stainless steel.

Technical Specification:

Attachment Lift Capacity:       60kg / 132.28lbs (maximum) load.    

Centre of Gravity:                     291mm / 11.46 inches (from column).

Attachment Mass:                    13kg / 28.66lbs.                                  

Main Materials:                         Stainless Steel 304.

For more information on the lifting attachment for handling barrels or kegs of beer please contact Packline Materials Handling.