The
adjustable, clamping cradle attachment has been designed and produced to fulfil
a customer’s requirement of lifting, transporting and loading different sizes
of rolls of paper and film to a range of different packaging machines.
Constructed
from stainless steel, the lifter is suitable for clean room environments, such
as those found in the food and pharmaceutical industries.
The
unique design supports the rolls by using a lifting shaft which is positioned
through the central core of the roll.
The shaft is retained at each end by a pair of securing latches. This ensures a safe and efficient solution
which provides simple and controlled operation.
The lifting shaft is of a set length which enables
the handling of many roll widths. The clamp attachment can be quickly and
easily adjusted by a handwheel to suit the specific roll which is being handled
at any one time.
The lifter raises and lowers the attachment by a
battery powered mechanism and is operated by simple up and down buttons which
are located ergonomically on the machines handle bars.
The design offers strength and durability with ease
of operating and is suitable for the food industry and other hygienic applications
as the solution is manufactured in stainless steel.
Technical Specification:
Attachment Lift Capacity: 150kg / 330.69lbs.
Centre of Gravity: 747mm / 29.41 inches (from column).
Attachment Mass: 58kg / 127.87lbs.
Main Materials: Stainless Steel & Anodised Aluminium.
Lifting Shaft Diameter: 25mm / 0.98 inches.
Minimum Lifting Shaft Length: 590mm / 23.23 inches.
Maximum Lifting Shaft Length: 1122mm / 44.17 inches.
Centre of Gravity: 747mm / 29.41 inches (from column).
Attachment Mass: 58kg / 127.87lbs.
Main Materials: Stainless Steel & Anodised Aluminium.
Lifting Shaft Diameter: 25mm / 0.98 inches.
Minimum Lifting Shaft Length: 590mm / 23.23 inches.
Maximum Lifting Shaft Length: 1122mm / 44.17 inches.
For
more information on the stainless steel clamping cradle attachment for handling rolls please contact Packline Materials Handling.
No comments:
Post a Comment