Vacuum Lifting Equipment with the Two-Joint Swing Arm

The vacuum lifter with the two joint swing arm attachment enables users to repeatedly lift and accurately place a wide variety of loads including paper and plastic sacks, boxes, sheets of material, crates and cartons, stone and building materials.

The bags or sacks can be split and opened without losing suction from the vacuum lifting head.

An electrically driven vacuum pump provides both lifting and suction functions and a wide range of quickly interchangeable vacuum heads is available. 

The two joint swing arm attachment can continuously rotate, and the slide mechanism on the hinged arm gives a full range of movements.

The vacuum lifting heads have a 'fingertip' control bar so the operator uses minimum effort to move heavy loads.

Safety is of paramount importance, and in the event of a power failure, the load is gently lowered to the ground before the suction head will release.

The vacuum lifters can be specified in stainless steel for use in the food, drinks and pharmaceutical industries.

With a remotely installed power pack, the vacuum lifters can also be installed in hazardous areas.

Specifications:

Maximum Standard Safe Working Load = 100kg
Maximum Standard Arm Reach = 2500mm
Standard Lift Height from Floor Mounted = 1750mm
Standard Lift Height mounted on Counterbalance = 1930mm
Work Area = 360 degrees
Standard Total Height, Floor Mounted = 3100mm
Standard Total Height mounted on Counterbalance = 3280mm
Vacuum Pump = -0.45 bar 5.0 A, 3 x 400 V/50 Hz

For more information on the Two Joint Swing Arm Vacuum Lifter or the full range of materials handling equipment, please contact Packline Materials Handling.