Tuesday, 9 June 2015

‘CLE’ Clamp Attachment for Handling Large Reels


The ‘CLE’ clamp attachment has been designed with very large reels in mind. The need to lift larger reels is becoming a more frequent requirement.

This lifting clamp attachment uses two linear actuators which are driven in synch with each other to clamp or unclamp the arms. These are available as a 12v or 24v solution.

The natural rubber pads on the clamp arms ensure that the reel is not damaged in any way during the operation.

The actuators have built-in torque units meaning the arms cannot be over-clamped, causing damage to the reel.

Springs have been fitted to the attachment arm pads to stop them from swinging freely when not in use. On lifting the reel or load the springs extend. When the reel is released, the springs contract to return the clamp attachment to its resting position.

Specifications:

Maximum Capacity: 450kg (992.08lbs approx.)

Load Centre: 855mm from front of column (33.66 inches approx.)

Attachment Mass: 150kg (330.69lbs approx.)

Minimum Reel Diameter: 250mm (9.84 inches approx.)

Maximum Reel Diameter: 1200mm (47.24 inches approx.)

Main Materials: Stainless Steel 304, Aluminium 6082/T6, Delrin, Polypropylene, Brass, Phosphor Bronze.

For more information on the ‘CLE’ Clamp Attachment for Handling Large Reels, or the full range of materials handling equipment, please contact Packline Materials Handling.

No comments:

Post a Comment