The tray attachment with core gripper attachment has been
designed to allow the operator to lift a reel from the vertical position,
rotate to the horizontal position, followed by rotation of the reel via a
rotating tray.
Constructed from stainless steel this reel handling equipment is suitable for clean room environments such as food and drinks
processing, and pharma industries.
The lifting attachment uses a frame of box section in
stainless steel for structural stability, and an actuator to grip the core of
the reel, with a detachable pin, which is mounted to the side of the lifter.
The actuator and pin can be moved away from the reel when it
is in the horizontal position on the rotating tray. This allows the operator to
move the tray into the necessary position for unloading onto a mandrel or
processing machinery, for example.
The actuator is controlled using a remote control pendant,
as is the lift and lower mechanism of the lifter.
Specification:
Safe Working Load (SWL): 50kg / 110.23lbs
Attachment Mass: 52kg / 114.64lbs
Maximum Reel Diameter: 350mm / 13.79 inches
Maximum Reel Length: 260mm / 10.24 inches
For more information on handling and rotating reels of film
or foil with the tray and core gripper attachment please contact Packline Materials Handling.
No comments:
Post a Comment