Wednesday 15 June 2016

Reel Handling Equipment with Extended Vertical Spindle Attachment for Handling Longer Reels


New to Packline is the reel lifting equipment with extendedvertical spindle attachments, available in widths of 3” or 6”.

The extended 3” or 6” spindle attachments allow much longer reels to be lifted.

The rollers on the attachment mean that the transition from the spindle attachment to the processing line mandrel is much easier and smoother.

The additional length of the attachment ensures that the load centre of the reel is still on the length of the spindle.

Geared rotation allows the operator to re-orientate the reel just by turning the hand-wheel.

This lifting solution enabled the operator to pick up large reels, rotate them and then raise them above head height in order to load the reels onto a processing line.

Most reel sizes can be catered for and therefore each application is designed and manufactured individually to ensure the required spindle attachment is supplied.

Specifications 3” spindle:

Maximum capacity: 250kg / 551.16lbs (with appropriate leg length).

Load centre: 722mm / 28.43 inches from front of column.

Attachment mass: 43kg / 94.80lbs.

Main materials: stainless steel 304, aluminium 6082/T6, Delrin Polypropylene, brass, phosphor bronze.

Specifications 6” spindle:

Maximum capacity: 175kg / 385.81lbs (with appropriate leg length).

Load centre: 783mm / 30.83 inches from front of column.

Attachment mass: 43.5kg / 95.9lbs.

Main materials: stainless steel 304, aluminium 6082/T6, Delrin Polypropylene, brass, phosphor bronze.

For more information on reel handling equipment with extended vertical spindle attachment, please contact Packline Materials Handling.

No comments:

Post a Comment