Quattrolifts ‘Nomad’ Glass Lifter from Packline Materials Handling

The Quattrolifts ‘Nomad’ Glass Lifter, from Packline Materials Handling, is designed to assist glaziers to unload, transport and install glass safely.

The ‘Nomad’ Glass Lifter can rotate glass measuring up to 4400mm / 180”.

This glass lifter has adjustments to allow for side and top pocket glazing.

Features:

• Prevents breakages and damage to glass in transport and installation.
• Protects the workers whilst carrying glass.
• Lifts and Rotates long plates of glass.
• Loads and unloads glass onto and off an A-frame truck.
• Transports and installs glass into most frames.
• Lifts glass weighing up to 400kg (880lbs) (4500mm wide x 3600mm high).
• Requires only 2 people to transport and install glass safely.
• Can be easily assembled and transported via a mid-size van or A-frame truck.
• Transports glass over uneven ground.
• Rotates glass from horizontal to vertical.
• Portable and easy to use.
• Increases productivity.
• Reduces health and safety risks.
• Suitable for use on construction sites.
• Installs glass into most frames.
   

For more information on the Quattrolifts ‘Nomad’ Glass Lifting Equipment please contact Packline Materials Handling.

Forward Tipping Drum Rotator from Packline

The Forward Tipping Drum Rotator has been designed to lift and rotate drums, and allow the contents to be dispensed in a controlled manner.

This Drum Handler is suitable for steel open top or tight head drums with rolling rims and a capacity of up to 205 litres.

The drums are clamped in a steel hoop with an adjustable clamp and locking pin.

The forward rotation of the drum lifter is provided by a hand wheel operated manual gearbox and this provides the operator with full control during the dispensing process.

The drums are clamped between the rolling rims via an adjustable over-centre chain and locking pin.

This drum rotating attachment is suitable for many industries including chemical, printing, oil, gas, automotive and construction.

As with all Packline equipment, the attachment is backed up by a full bespoke design service ensuring the right solution can be made to suit any type, make or size of drum.

Technical Specification:

Attachment Lift Capacity: 250kg / 551lbs (maximum) load.

Attachment Mass: 70kg / 154lbs.

Main Materials: Mild steel, painted.

For more information on the forward tipping drum rotator, or the full range of lifting and handling equipment, please contact Packline Materials Handling.

Quattrolifts Glass Lifting Harness

The Quattrolifts Glass Lifting Harness, from Packline, makes moving large panes of glass easy and quick, whilst maintaining safety.

The Glass Lifting Harness caters for tradesmen carrying glass manually. This lifter allows one person to carry the glass, where normally two people would be required.

This is a harness that is designed to support up to 50kg and allows the operator to transport the glass without the need to hold the weight of the glass while walking.

Both the straps and the glass support are fully adjustable to cater for all persons. Optional padded shoulder supports are also available.

Features:
Safe Working Load (SWL): 50kg / 110lb.
One man operation.

For more information on the Quattrolifts Glass Lifting Harness, or the full range of Glass Handling Equipment, please contact Packline Materials Handling.

Packline ‘Compac’ Lifter with Platform Attachment for Lifting and Handling Sacks of Material

The bespoke dual column lifter, from Packline, was designed to lift sacks of ingredients from a pallet to a mezzanine floor with a height of 2.8m.

 

Packline’s standard ‘Compac’ Lifter is limited to lift to 2.5m as standard for safety and practicality reasons.

 

However, in this instance, a platform attachment was needed to reach higher than 2.5m.

 

The requirement was to lift 25kg sacks of material up to a mezzanine floor; the operator then opened the sack when stood up on the mezzanine floor.

 

To achieve this requirement, a dual column has been fitted to the ‘Compac’ lifter in order to reach a height of up to 2.8m from the platform attachment.

 

Simple push button controls on a mounted pendant remote control allow the operator to lift the sacks using the main lifter column first, or by the dual column separately.

 

Once at the required height, the sacks can be taken from the platform attachment and placed onto the mezzanine, or another truck, for example.

 

The stainless steel structure makes this lifting solution suitable for the food and pharmaceutical industries.

 

Extra leg supports were added to the ‘Compac’ Lifter to ensure maximum safety levels at height, and an efficient and manoeuvrable design for the customer.

 

Technical Information:

 

Safe Working Load (SWL): 100kg (220.46lbs).

 

For more information on the Dual Column Lifter for handling sacks, please contact Packline Materials Handling.

Stainless Steel Stacker Truck with Cradle Attachment for Lifting Euro-Bins

The stainless steel heavy duty stacker truck, from Packline Materials Handling, is fitted with a cradle attachment specifically designed to lift standard Euro-Bins. These bins often need lifting to height allowing for the contents to be more easily emptied; as well as enabling the bins to be stacked or stored at height.

Euro-Bins are used widely in food processing industries to store and transport ingredients or products. This stainless steel lifter is an ideal solution for this application.

The stainless stacker truck has electric lift and manual propulsion.

The stacker truck is constructed from stainless steel, ensuring suitability for clean room environments and food industries. Mild steel painted trucks are also available.

This stainless stacker can lift to 3 metres.

The lifter can handle up to a load weight of 1000kg.

For more information on the stainless steel stacker truck with cradle attachment for lifting Euro-Bins, please contact Packline Materials Handling.

Packline Quattrolifts Express 150 Glass Lifter

The Express 150 glass lifter is designed to allow glaziers to unload, transport and install sheets of glass.

This glass handling trolley has a lifting capacity of 150kg (330lb).

The glass lifter can rotate glass measuring up to 3000mm (120”), with adjustments to allow for side and top pocket glazing.

The Quattrolifts Express 150 glass lifting trolley is an innovative and small portable lifter that allows one person to move sheets weighing up to 100kg (220lb) or two people to move up to 150kg (330lb).

The ‘Express 150’ is loaded onto a truck in two 15kg (33lb) parts and easily assembled in under a minute.

Features include:
One person can lift 100kg (220lb).

Two people can lift 150kg (330lb)

Rotates sheets up to 3000mm (120”)

The Express 150 weighs less than 35kg (77lb)

Moves inside lifts.

Moves through doorways.

Travels over construction sites.

Optional side-shift for glass installation.

For more information on the Quattrolifts Express 150 Glass Lifting Trolley contact Packline Materials Handling.