The new clamp attachment, for handling reels of film, has
been designed to provide greater load capacity, strength, durability and
improved ease of use.
This new, improved design provides better wear resistance.
There is less friction making the clamp attachment easier to operate; and providing
a better grip on the reel or roll.
The new design also provides precise control of the motor
and the position of the clamp in rotation.
The clamp attachment has been designed to suit the lifting
and rotation of reels which are between 250mm (9.84”) and 600mm (23.62”) in
diameter.
The manual clamping action is provided by a hand-wheel which
has a torque limiter fitted so that the clamp does not over tighten.
This reel clamp attachment can also be rotated through 360
degrees, and can be locked off in increments of 90 degrees with the unique
quick release system.
This lifter is suitable for the food and pharmaceutical
industries, as well as other clean room applications.
The attachment is backed up by a full bespoke design service
ensuring the right solution can be made to suit any make or size of reel.
All Packline attachments are fully interchangeable and can
be easily fixed or removed from any model of ‘Compac’ Lifter fitted with the
quick release system.
Specifications:
Attachment Lift Capacity: 200kg / 440.93lbs (maximum).
Load Centre (C of G): 561mm / 22.09 inches (from column).
Attachment Mass: 64kg / 141.10lbs.
Main Materials: Stainless Steel and Anodised Aluminium.
Attachment Lift Capacity: 200kg / 440.93lbs (maximum).
Load Centre (C of G): 561mm / 22.09 inches (from column).
Attachment Mass: 64kg / 141.10lbs.
Main Materials: Stainless Steel and Anodised Aluminium.
For more information on the clamp attachment for lifting and
rotating reels of film please contact Packline Materials Handling.
No comments:
Post a Comment