Roll Handling with the Cut-Out Single Spindle Attachment

Packline Materials Handling new single spindle attachment with ‘cut-out’ incorporates the standard single spindle design, but with a cut-out section through the horizontal to allow for any fixtures or fittings on the reel itself or the processing machinery to be unaffected; thereby lifting the roll via its core without causing damage to the roll or machinery.

The spindle lifting attachment if designed to transport rolls of film or foil to a racking system where the rolls are supported to small booms. The cut-out section on the spindle allows the lifting attachment to support the central core of the reel but clears the support boom.

The central carriage of the lifting equipment is fitted with a ‘proximity switch’ to precisely lift the roll to the exact height specified by the operator. Full movement of the attachment can still be achieved by pressing the override button when the pre-specified height is not required.

The top of the ‘cut-out’ sections are fitted with Delrin strips which protect the core of the reel from slicing or cutting.

Specifications:

Safe Working Load:  85kg

Attachment Mass:  9.2kg

Maximum Reel Length:  750mm

For more information on the roll lifter with cut-out single spindle attachment or the full range of materials handling equipment please visit www.packline.co.uk.