In order to lift and rotate drums of any size, a sufficient
clamping mechanism is essential. The SC10 clamping mechanism incorporates a Chain
and Pin mechanism in order to carry out this clamping process.
Designed for handling steel drums as standard, the arms of
the SC10 clamp are manufactured to fit the diameter of the drum being lifted.
The Chain and Pin mechanism is then used to hold the drum in place during
lifting and rotating.
For plastic drums, which often do not have the ribs such as
those found on steel drums, a safety adapter can be fitted to allow for easy
lifting and rotating.
The forward tipping motion is operated using a 50:1 gearbox
and a hand-wheel. This allows for a full rotation of the drum, if required.
The unit as a whole is lifted on the forks of a forklift
truck and is attached using fork pockets. It is secured in place using Zinc
plated ‘T’ bolts, and finished in a hard wearing blue gloss powder coat.
Specifications:
Safe Working Load (SWL): 500kg
Fork Entry: 130mm x 70mm
Fork Spread: 700mm between forks is required.
Weight of Unit: 70kg
For more information on the drum rotator with clamping chain
and pin mechanism for handling steel drums, or the full range of lifting and
handling equipment, contact Packline Materials Handling.
No comments:
Post a Comment