Rolls or reels of film or foil can have a tendency to
telescope, or drums can slip or crush when being lifted from the core or the
circumference. This handling issue is usually overcome by using a higher rated
torque unit to lift the rolls or drums. In some cases a higher rated torque
unit is still not sufficient to prevent the rolls or reels from telescoping or the
drums slipping whilst being lifted. In these situations an alternative solution
is required.
This issue can be resolved by the use of a clamp attachment
with adjustable retainers. These adjustable retainers are designed to cover a
wide range of roll, reel and drum diameters and lengths, all of which can be
lifted by the clamp attachment.
‘Star knobs’ are used to secure the retainers in place
vertically by screwing into the sides of the arms. The width of the retainers
is then adjusted using plunger pins through holes in the plates.
A fully stainless steel and anodised aluminium solution
means that this roll handling solution is suitable for the food processing and pharmaceutical
industries, ideal for handling rolls or reels of film or foil; and drums of
ingredients.
Specifications:
Safe Working Load (SWL): up to 200kg depending on drum or
roll type and size.
Maximum Roll or Drum Diameter: 550mm
Minimum Roll or Drum Diameter: 200mm
For more information on this roll handling solution with
clamp attachment incorporating retainers, or the full range of materials handling equipment, please visit packline.co.uk.
No comments:
Post a Comment